Skip to main content

The Vickers V8 IOM Laser Cut Frames For Sale!

Ian Vickers has decided to sell the file to create laser cut frames for his well-liked V8 IOM RC sailboat so that you can build one at home!

He's selling the plans for the V8 along with the file that you would send to a laser cutter. He is NOT selling the actual laser cut frames. And you are only allowed to make ONE boat from the plans and the frame file. It's a fair deal.

If interested, go to his website and check it out. Once you pay for the plans and file, he will send you an email confirming that you agree to only build one boat, and then he will send you the file. You then research a laser cutter in your country and have them cut it.

Here is a purposely blurred image of the DWG file that you will receive and send to your laser cutter. (It's blurred and low-resolution to protect Ian's intellectual property.) 

Vickers V8 IOM laser cut frames

The file is ten sheets of plywood, all 12" x 24". If you're not in the States or Canada, then you'll probably display that in millimeters but you shouldn't scale the file though. It's already at the correct size. There are four different thicknesses of plywood used:

6 sheets are 3mm (1/8”) “Lite Ply” which is lightweight plywood made from poplar wood.

2 sheets are 1.5mm (1/16”) birch plywood.

1 sheet is .9mm (1/32”) birch plywood.

1 sheet is .4mm (1/64”) birch plywood.


He's charging $100 NZD (about $60 USD) for the plans and file package. Pretty sweet deal if you ask me!

If you're thinking of stepping up to a big challenge, then this may be your project. But it's a LOT of work, it's NOT a kit, and it will cost you some money to build this thing.



 Cheers!




Labels:

Comments

  1. Anonymous30 December, 2020 03:07

    Hi Steve,
    No new notices from april2020, how are things going? Hope well.
    Waiting for the IOM book.
    Here in Madrid, Spain, we are working in a Ellipsis from Frank Russel design.
    Really a lot of problems but still goin on.
    Your web is very helpfull for us.
    Thank you.

    Sergio CR

    ReplyDelete
  2. Steve30 December, 2020 17:17

    Hi Sergio,

    Thanks for the comment. Yes, it's been a year of big changes for me. Please see my latest post for updates: https://www.rcmodelyachts.com/2020/12/signing-off-for-now-fair-winds.html

    I may be able to work on the Wooden IOM Construction Manual in the future, but not immediately. Email me privately for more information and we can chat about a proof-copy.

    ReplyDelete

Post a Comment

Popular posts from this blog

1934 America's Cup Rainbow J-Class RC Drawing

At some point I would very much like to model a vintage America's Cup yacht. The one I've been most interested in lately in the 1964 winner Constellation. But this past week I was sent a 1/16 scale drawing of the 1934 Rainbow. It's a beautiful drawing! Full sized so it's very large. I have been working on making it into a 3D model, but as is true with most hand-drawing lines, none of the lines from one view match up with the lines from the other views. For example, I spent a lot of time tracing the "sections" view so I could make stations. But when I tried to match them up with the plan/deck view or the waterplanes view, none of the lines met. Some came close, but all had to be adjusted. Then, once they are matched to the deck and keel lines, it's obvious that the hull is not fair. I honestly doubt that the hull would be fair if you simply used the station lines as originally drawn either. Back when they made these boats, they put it on the actual bu...
2 comments
Read more

IOM Rig Box (IOM Sail Box) plans

So all the cool IOM kids seem to have nice wooden boxes to store their rigs in. This might be my next quick project then, so that I can pretend to be cool too. :-P The rig box images that I've seen online are mostly similar, and would work well, but David Jensen from Bellevue, WA, USA (The same guy who designed a fantastic IOM boat stand I posted about earlier) has a really nice design that he shared on RC Groups . Or if that link doesn't work, the go here and search for " IOM sail box " or " IOM rig box ". It holds three sets of rigs for the A, B, and C rigs. He also has a nifty way to attach his IOM boat stand, with a boat on it, to the rig box. His rig box has wheels attached, so once everything is loaded up he just wheels it to the launch spot. Very nice! There are other sources online. They show different variations of the same type of sail box. Here's a nice looking one . Here's a YouTube video of a really nice one . Wil...
1 comment
Read more

Made a Mast Crane

Made a mast crane based on one that I have made in the past for my Star 45's. Works well for them, and should work well for a Vintage Marblehead Sun Wind. It's made from brass, with a bar for strength soldered to the top. The idea is that a slot will be cut into the top 2" of the mast, and the crane will be through-bolted. This link is to the original schematic of a mast crane that you can build yourself, courtesy of the Miami Valley Model Yacht Club in Ohio.  Here is my updated version. Click to see the full-sized image and then copy and paste it into Word. It "should" print at just about the correct size, but you may have to adjust the image a bit. Cut it out and spray glue it to some brass sheet. Cut it out on a band-saw and then sand smooth. Be careful when working with tools and metals!! This is what I ended up with for my Sun Wind HF. I decided to reinforce the crane with a length of brass bar soldered to the top edge. Back to deck pl...
Post a Comment
Read more

IOM Sailboat Stand

I made an IOM boat stand! The plans are from David Jensen in Bellevue, WA, USA. I found the plans through someone else's blog here , and a model sailboat club from Australia here . It was pretty straightforward to build. My only contribution to the design is that I laser cut the cradle out of 1/8" Lite Ply. I made eight copies, and then epoxy laminated two sets of four each. Turned out really well. If you wish to laser cut your own set, here is my DWG file . You'll have to have your own laser cutter, or send the job to a laser cutting company like National Balsa . Here are the original plans , and here are the original plans for just the cradle . Thanks to David Jensen!! Note that in the picture below, my boat is not finished! Yikes. You can't see it in this image, but there's a small chuck of self-stick foam behind the bulb to protect the bulb. I'll eventually incorporate some Velcro or a strap of some sort to hold the bulb in place so...
Post a Comment
Read more