While I'm waiting for the 6th coat of varnish to harden on the hull, I've started to varnish the mast.
Yes, I'm an idiot for not varnishing the mast all along with the six coats on the hull! But I managed to get one coat on so far.
Today I cut the slot for the mast crane, fitted the crane, and drilled two holes for through-bolts. Next, I'll remove the mast crane and return to varnishing the mast.
Notice too that I soldered a brass tube to the mast crane. It is to hold a wind indicator that I'll make shortly. Should work well... I hope!
More later.
Aloha!
Yes, I'm an idiot for not varnishing the mast all along with the six coats on the hull! But I managed to get one coat on so far.
Today I cut the slot for the mast crane, fitted the crane, and drilled two holes for through-bolts. Next, I'll remove the mast crane and return to varnishing the mast.
Notice too that I soldered a brass tube to the mast crane. It is to hold a wind indicator that I'll make shortly. Should work well... I hope!
More later.
Aloha!
Comments
Post a Comment